top of page
excel-brand-logo-light.png

Garage Equipment Inspection Services Medway

circles.png

From MOT bay lifts in Chatham to air compressors in Gillingham and vehicle ramps in Rochester, garage equipment is essential to daily operations across Medway. With heavy loads and constant use, maintaining compliance under LOLER (Lifting Operations and Lifting Equipment Regulations 1998), PUWER (Provision and Use of Work Equipment Regulations 1998) and PSSR (Pressure Systems Safety Regulations 2000) is critical for safety and insurance purposes.

​

At Excel Inspection Solutions, we provide garage equipment inspections across Medway, helping MOT centres, fleet operators and independent garages in Chatham, Rochester, Gillingham, Strood and Rainham remain compliant and operational. Our engineer surveyors work to HSE standards, carrying out detailed examinations supported by clear, photographic digital reports.

What garage equipment can be examined in Medway?

Any equipment in your Medway workshop that lifts, supports or raises a vehicle may fall under LOLER or PUWER. Typical items we inspect include:

​

  • Vehicle ramps used in MOT and repair centres

  • Engine cranes and transmission jacks

  • Axle stands and hydraulic jacks

  • Mobile column lifts

  • Two-post and four-post lifts across Medway body shops and workshops

  • Scissor lifts and under-vehicle platforms

  • Air receivers and compressors covered by PSSR regulations

​

We inspect all major makes and models, including equipment installed in MOT bays, fleet workshops and dealership service centres.

How LOLER regulations apply to Medway garages

The Health and Safety Executive (HSE) enforces LOLER, requiring all lifting equipment to be inspected by a competent person at defined intervals. In Medway, garage operators must ensure:

​

  • Lifting equipment is examined every 6 or 12 months depending on use

  • Reports are recorded and stored for audit or insurance purposes

  • Unsafe equipment is removed from service immediately

​

Our LOLER inspection reports include photos and detailed compliance notes, ensuring every Medway garage can demonstrate adherence to HSE requirements.

PUWER and garage equipment in Medway

While LOLER focuses on lifting equipment, PUWER applies to a broader range of garage tools and systems, including power tools, jacks, and presses. PUWER requires that all equipment in Medway workshops is suitable for its intended use, well maintained, and inspected regularly.

​

We can combine LOLER and PUWER assessments in a single visit, reducing disruption while ensuring full compliance across your site.

Why regular inspection matters for Medway garages

With high workloads and heavy-duty equipment, garage safety in Medway depends on proactive inspection and maintenance. Regular checks help:

​

  • Maintain compliance with LOLER, PUWER and PSSR

  • Identify faults or wear before they become dangerous

  • Protect technicians and customers from harm

  • Meet insurance and audit requirements

  • Avoid costly downtime and enforcement notices

​

From fleet workshops in Gillingham to independent garages in Rochester, we help Medway operators stay safe, compliant and efficient.

Our garage lift inspection process in Medway

Our inspection process is structured, thorough and designed to minimise disruption. It includes:

​

  • Full visual and functional inspection of all lifting and pressure systems

  • Identification of deterioration, faults or unsafe conditions

  • Advice on items that must be taken out of service

  • Digital reporting with photographic evidence and next steps

​

All inspection records are fully compliant with LOLER and PSSR, ready for insurers, auditors or the HSE.

Why choose Excel Inspection Solutions in Medway

Whether you manage a dealership workshop in Chatham or an independent garage in Gillingham, we understand the operational demands of busy repair environments.

​

Medway clients choose us for:

​

  • Fully qualified engineer surveyors with garage industry expertise

  • Combined LOLER, PUWER and PSSR inspections in one visit

  • Digital reports with photographic documentation

  • Flexible scheduling and minimal downtime

  • Local coverage across Chatham, Rochester, Gillingham, Strood and Rainham

Decorative image of orange circles

Garage Equipment Inspection FAQs Medway

What equipment in my Medway garage requires inspection?

Any lifting or pressure equipment such as ramps, lifts, jacks, and compressors must be inspected regularly under LOLER and PSSR.

How often do I need inspections in Medway?

Lifting equipment should be inspected every 6 months if lifting people or 12 months otherwise. Pressure systems are inspected as defined in their Written Scheme of Examination.

Do you inspect MOT bay equipment in Medway?

Yes. We inspect all types of MOT, repair and body shop lifting equipment, including scissor and four-post lifts.

Are your inspection reports HSE-compliant?

Yes. Our digital reports meet LOLER, PUWER and PSSR standards and include photographic evidence for audit purposes.

Can you carry out LOLER and PUWER checks at the same time?

Yes. Combined inspections are available to save time and reduce operational disruption.

Garage equipment inspections across Medway and the South East

Excel Inspection Solutions provides garage equipment inspections across Medway, including Chatham, Rochester, Gillingham, Strood and Rainham. As part of the Engineer Surveyor Inspection Network (ESiNet), we also deliver inspections across Kent, the South East and throughout the UK.

Other statutory inspections in Medway

Looking for support with more than just lift inspections? Excel Inspection Solutions provides a full range of statutory inspection services across multiple equipment types — from mobile plant and pressure systems to cranes and work at height equipment. Explore our other core services below.

bottom of page