top of page
excel-brand-logo-light.png

Work at Height Equipment Inspections Kent

circles.png

Working at height is one of the most common – and most dangerous – activities across industries from construction to facilities management. Every ladder, harness, and fall arrest system must be reliable, compliant, and routinely inspected.

 

At Excel Inspection Solutions, we provide statutory work at height equipment inspections across Kent, helping businesses, contractors, and property managers stay compliant with the Work at Height Regulations 2005, PUWER, and where relevant, LOLER. From Folkestone to Canterbury, Maidstone to Dartford, we’re your local partner for thorough and professional inspections.

What equipment do we inspect in Kent?

We carry out independent inspections on a wide range of work at height equipment for businesses, schools, councils, and contractors across Kent, including:

​

  • Ladders (fixed and portable)

  • Safety harnesses

  • Fall arrest lanyards

  • Inertia reels

  • Tripods and rescue kits

  • Anchor points

  • Mobile access towers (PASMA)

  • Roof safety systems and walkways

​

Where height safety equipment is used to lift people (such as MEWPs or man baskets), we also provide LOLER inspections throughout Kent.

How are these inspections regulated?

The Work at Height Regulations 2005 require that all equipment used for working at height is:

​

  • Properly maintained

  • Inspected at suitable intervals

  • Checked by a competent person

  • ​

PUWER (Provision and Use of Work Equipment Regulations 1998) also applies, ensuring that work equipment is safe, maintained, and fit for purpose.

​

If lifting equipment is used (such as rescue winches or MEWPs), LOLER requirements also come into play.

LOLER, PUWER & the Work at Height Regulations in Kent

The Work at Height Regulations 2005 apply to all businesses in Kent where employees use ladders, harnesses, or fall protection systems. These regulations require that equipment is properly maintained, inspected at regular intervals, and checked by a competent person.

​

In addition:

  • PUWER ensures all workplace equipment in Kent is safe and fit for purpose.

  • LOLER applies where lifting equipment, such as MEWPs, is used to raise or lower people.

​

Our local Kent surveyors ensure you remain fully compliant across all three areas of legislation.

Why regular inspection matters in Kent

Falls from height remain one of the leading causes of accidents in Kent workplaces. Faulty or poorly maintained equipment increases the risk significantly. Regular inspections:

​

  • Identify unsafe or damaged items before they cause accidents

  • Ensure compliance with HSE requirements for Kent businesses

  • Help avoid costly fines, downtime, or insurance issues

  • Reduce liability for employers and duty holders

  • Provide reassurance for staff, contractors, and site visitors

Why choose Excel Inspection Solutions in Kent?

  • Local engineer surveyors covering Maidstone, Medway, Canterbury, Ashford, Dartford, Dover, Folkestone, Tonbridge, Sevenoaks, and Tunbridge Wells

  • Specialist knowledge of work at height equipment and fall protection

  • Fully qualified surveyors under LOLER and PUWER

  • Clear, digital reports with photographic evidence

  • Flexible scheduling across Kent to suit your operations

  • Trusted by Kent councils, housing associations, schools, and FM companies

Decorative image of orange circles

Work at Height – FAQs for Kent

How often should harnesses and lanyards be inspected in Kent?

At least every 6 months, or more frequently if used heavily or in harsh conditions.

Do ladders in Kent workplaces need PUWER inspections?

Yes. All ladders used for work in Kent must be inspected to ensure they’re safe.

What happens if my equipment in Kent fails inspection?

It must be removed from service immediately. We’ll record the defect in your Kent inspection report and advise on replacements.

Do I need to keep inspection records in Kent?

Yes – inspection records must be available if requested by the HSE. We provide digital reports for all Kent inspections.

Can you inspect roof safety systems and anchors in Kent?

es. We regularly inspect permanent and temporary systems, including anchors, walkways, and handrails across Kent sites.

Covering Kent and beyond

Excel Inspection Solutions provides work at height inspections throughout Kent, including:

  • East Kent: Canterbury, Dover, Deal, Folkestone, Thanet

  • Mid Kent: Maidstone, Ashford, Sittingbourne, Faversham

  • West Kent: Tunbridge Wells, Tonbridge, Sevenoaks

  • North Kent & Medway: Dartford, Gravesend, Rochester, Chatham, Gillingham

We also support national clients who require multi-site work at height inspections outside Kent.

Other Services

Excel Inspection Solutions provides a full range of statutory inspection services, covering much more than just work at height equipment. Our experienced surveyors inspect and certify:

bottom of page