top of page
excel-brand-logo-light.png

Work at Height Equipment Inspections Essex

circles.png

Working at height is one of the highest-risk activities across industries in Essex, from construction projects and warehousing to schools, hospitals, and public buildings. Every ladder, harness, and fall arrest system must be reliable, compliant, and regularly inspected by a competent person.

​

At Excel Inspection Solutions, we provide statutory work at height equipment inspections across Essex, including Chelmsford, Colchester, Basildon, Southend-on-Sea, Harlow, and Brentwood. Our qualified surveyors help you stay compliant with the Work at Height Regulations 2005, PUWER, and, where required, LOLER, ensuring your staff, contractors, and site visitors are always protected.

What equipment do we inspect in Essex?

Our experienced engineer surveyors inspect a wide range of height safety equipment for businesses, councils, and housing providers throughout Essex, including:

​

  • Ladders (fixed and portable)

  • Safety harnesses

  • Fall arrest lanyards

  • Inertia reels

  • Tripods and rescue kits

  • Anchor points

  • Mobile access towers (PASMA)

  • Roof safety systems and walkways

​

Where equipment is used to lift people (such as MEWPs or man baskets), we also provide LOLER inspections across Essex to ensure full compliance.

LOLER, PUWER & the Work at Height Regulations in Essex

The Work at Height Regulations 2005 require that all height safety equipment used in Essex workplaces is properly maintained and inspected at suitable intervals.

​

  • PUWER ensures ladders, towers, and other access equipment are safe and suitable for use.

  • LOLER applies where equipment is used to lift or lower people, such as MEWPs or rescue winches.

​

By combining these legal requirements, our Essex inspections provide full assurance of safety and compliance.

Why regular inspection matters in Essex

Falls from height remain one of the most common causes of serious workplace accidents in Essex and across the UK. Regular inspections help to:

​

  • Identify unsafe or damaged equipment before it causes harm

  • Maintain compliance with HSE and UK legislation

  • Reduce liability for employers and property managers

  • Prevent costly accidents, downtime, and insurance issues

  • Reassure employees and contractors that equipment is safe to use

Our inspection process in Essex

From construction sites in Chelmsford and Basildon to warehouses in Colchester and schools in Southend-on-Sea, we adapt our inspection process to meet your site needs. A typical Essex inspection includes:

​

  • Visual and physical examination of each item

  • Functional testing where appropriate (e.g. fall arrest devices)

  • Immediate removal of any non-compliant or unsafe equipment

  • Digital reports with clear notes and photographic evidence

  • Optional tagging and asset registers to support asset management

Why choose Excel Inspection Solutions in Essex?

  • Local engineer surveyors covering Chelmsford, Colchester, Basildon, Southend-on-Sea, Harlow, Brentwood, and across Essex

  • Specialist knowledge of work at height and fall protection systems

  • Fully qualified surveyors under LOLER, PUWER, and WAHR

  • Clear, digital reporting with photos for full traceability

  • Flexible scheduling across Essex and the wider South East

  • Trusted by councils, housing associations, contractors, and facilities management companies

Decorative image of orange circles

Work at Height – FAQs for Essex

How often should harnesses and lanyards be inspected in Essex?

Harnesses, lanyards, and related equipment should be inspected at least every 6 months, but in high-use industries such as construction or warehousing in Essex, more frequent inspections may be needed. Our surveyors can advise the best inspection interval based on usage and conditions.

Do ladders in Essex workplaces need PUWER inspections?

Yes. Under PUWER, all ladders used in Essex workplaces — from portable ladders on building sites to fixed access ladders in warehouses — must be inspected to confirm they are safe, stable, and suitable for ongoing use.

What happens if a harness or lanyard fails inspection?

If any item fails inspection, it must be removed from service immediately. We record the defect in your inspection report, provide photographs, and advise whether the item can be repaired or must be replaced to restore compliance.

Do Essex businesses need to keep inspection records?

Yes. Inspection records are required under HSE guidance and may be requested during audits or investigations. We supply clear, digital reports for Essex inspections so you always have traceable, compliant records at hand.

Can you inspect roof safety systems and anchors in Essex?

Yes. We carry out inspections of both temporary and permanent roof safety systems across Essex, including anchors, fixed walkways, handrails, and fall protection systems. These are critical for safe roof access and maintenance.

Covering Essex and beyond

We provide work at height inspections across the whole of Essex, including major towns such as Chelmsford, Colchester, Basildon, Southend-on-Sea, Harlow, and Brentwood. Our surveyors support construction companies, housing associations, schools, healthcare providers, and FM teams in meeting their statutory inspection duties.

​

Beyond Essex, we also operate across the wider South East, including Kent, London, Surrey, Medway, and East Sussex. For larger organisations with multiple sites, our national engineer surveyor network provides UK-wide coverage, delivering consistent reporting and full compliance support across your portfolio.

Other Services in Essex

Excel Inspection Solutions provides a full range of statutory inspection services, covering much more than just work at height equipment. Our experienced surveyors inspect and certify:

bottom of page