top of page
excel-brand-logo-light.png

Garage Equipment Inspection Services Thanet

circles.png

From vehicle lifts in Margate and engine cranes in Ramsgate to air compressors in Broadstairs workshops, garage equipment is essential for the day-to-day operation of Thanet’s vehicle repair and maintenance sector. With heavy loads and high-frequency use, ensuring equipment safety and compliance under LOLER (Lifting Operations and Lifting Equipment Regulations 1998), PUWER (Provision and Use of Work Equipment Regulations 1998) and PSSR (Pressure Systems Safety Regulations 2000) is vital for protecting technicians, customers and your business.

​

At Excel Inspection Solutions, we provide garage equipment inspections across Thanet, supporting MOT stations, repair centres and fleet workshops in Margate, Ramsgate and Broadstairs. Our qualified engineer surveyors carry out thorough examinations in line with HSE standards, delivering clear, photographic digital reports that meet all regulatory requirements.

What garage equipment can be examined in Thanet?

Any equipment used to lift, support or raise a vehicle or component may be subject to LOLER or PUWER. Common garage systems we inspect across Thanet include:

​

  • Vehicle ramps and jacking systems

  • Engine cranes and transmission lifts

  • Axle stands and hydraulic jacks

  • Mobile column lifts used in fleet workshops

  • Two-post and four-post lifts in body shops and MOT bays

  • Scissor lifts and under-vehicle platforms

  • Air compressors and receivers covered by PSSR regulations

​

We inspect most major brands and configurations, including those installed in MOT test bays, independent garages and commercial vehicle workshops.

How LOLER regulations apply to Thanet garages

The Health and Safety Executive (HSE) enforces LOLER. Garage operators in Thanet are legally responsible for ensuring lifting equipment is inspected by a competent person at the correct intervals. This means:

​

  • Equipment must be examined every 6 months if lifting people, or every 12 months for general use

  • Records must be maintained and available for inspection

  • Unsafe or defective equipment must be taken out of service immediately

​

Our LOLER inspection reports include photographic evidence, detailed notes and compliance recommendations — ensuring your Thanet business remains fully aligned with HSE expectations.

PUWER and garage equipment in Thanet

Most workshop tools and systems also fall under PUWER, which requires employers to ensure all equipment is suitable, properly maintained and inspected regularly. PUWER applies to items such as power tools, presses, ramps, jacks and lifts.

​

We can carry out combined LOLER and PUWER inspections in one visit, ensuring full compliance with minimal disruption to your daily operations.

Why regular inspection matters in Thanet

Garage equipment failures can lead to serious accidents, costly downtime and HSE enforcement. Regular inspections help to:

​

  • Maintain compliance with LOLER, PUWER and PSSR

  • Identify issues such as fatigue, wear or corrosion early

  • Improve safety for staff and customers

  • Support insurance and audit documentation

  • Extend the life of your garage equipment

​

From independent garages in Margate to fleet workshops in Ramsgate, we help Thanet businesses stay compliant and efficient.

Our garage lift inspection process in Thanet

Our process is designed to be efficient, compliant and minimally disruptive. It includes:

​

  • Full visual and functional inspection of all lifting and pressure equipment

  • Identification of faults, wear or non-conformities

  • Immediate notification of safety-critical issues

  • Digital reporting with photographs, notes and next steps

​

All inspections are compliant with LOLER, PUWER and PSSR requirements and suitable for HSE or insurance audits.

Why choose Excel Inspection Solutions in Thanet

Whether you manage a busy MOT station in Broadstairs or an independent workshop in Margate, we provide reliable and professional inspection services across Thanet.

​

Thanet clients choose us for:

​

  • Qualified engineer surveyors with garage industry expertise

  • Flexible inspection scheduling to minimise disruption

  • Clear, photographic digital reports

  • Combined LOLER, PUWER and PSSR assessments

  • Coverage across Margate, Ramsgate, Broadstairs and the wider Thanet area

Decorative image of orange circles

Garage Equipment Inspection FAQs Thanet

What equipment in my Thanet garage requires inspection?

Any lifting, supporting or pressure equipment such as ramps, jacks, lifts and compressors must be inspected at set intervals under LOLER and PSSR.

How often do inspections need to take place in Thanet?

Lifting equipment should be inspected every 6 months (if lifting people) or every 12 months otherwise. Pressure systems follow intervals set by their Written Scheme of Examination.

Do you inspect MOT bay lifts and ramps?

Yes. We inspect all garage and MOT bay lifting equipment, including scissor, two-post and four-post lifts.

Are your reports compliant with HSE standards?

Yes. All our reports meet LOLER, PUWER and PSSR standards, and include photographic documentation.

Can you combine LOLER and PUWER inspections in one visit?

Yes. Combined inspections save time, reduce costs and minimise operational downtime.

Garage equipment inspections across Thanet and the South East

Excel Inspection Solutions provides garage equipment inspections across Thanet, including Margate, Ramsgate and Broadstairs. As part of the Engineer Surveyor Inspection Network (ESiNet), we also deliver inspections across Kent, the South East and nationwide.

Other statutory inspections in Thanet

Looking for support with more than just lift inspections? Excel Inspection Solutions provides a full range of statutory inspection services across multiple equipment types — from mobile plant and pressure systems to cranes and work at height equipment. Explore our other core services below.

bottom of page